Graphitization refers to the high-temperature heat treatment in which carbon products are heated to more than 2300 鈩?in the protective medium in a high-temperature electric furnace, so as to transform amorphous and disorderly layer structure carbon into three-dimensional ordered lithography structure. Lift the spare electrode to the top of the electrode to be connected. When the two electrode ends are 10-20mm apart, clean the exposed part of the two electrode ends and the joint with compressed air again. Be light to avoid damage to the thread of the electrode hole and the joint. Just tighten the spare electrode. The graphite and the forming tool are subjected to ultrasonic vibration while passing through the processing fluid. Under the action of the abrasive impact, the graphite is stripped in small amounts to form the desired shape. Abrasive for SIC, B4C or diamond, abrasive coarse processing speed is faster.600mm Graphite Electrode price
website:http://www.sanlonggraphiteelectrode.com/600mm-graphite-electrode/